Black Shark has launched the Black Shark 3 and 3 Pro in China. The Black Shark 3 features a 6.67-inch FHD+ display and the Pro variant has a 7.1-inch Quad HD+ screen. The devices come with a 90Hz refresh rate. Moreover, they support the world’s highest touch sampling rate of 270Hz. The company claims that the single-finger touch response delay is as low as 24ms, multi-finger touch response delay is as low as 28ms. Further, the number of pressure-sensitive sensors increased to 4, and the pressure-sensitive area increased by 48 percent.
The duo is powered by the Qualcomm Snapdragon 865, paired with up to 12GB LPDDR5 RAM. It features the “Sandwich” liquid cooling system, double-sided liquid-cooling covers key heat sources. Moreover, the heat dissipation area is increased by 100 percent and the heat dissipation capacity is increased by 50 percent compared to the previous generation. The phones come with Black Shark GameEngine and SolarCore intelligent game acceleration engine. It helps in loading the games faster. The company says complex scenes run more smoothly with minimal power consumption for the best gaming experience.
The Black Shark 3 Pro 5G has large gaming triggers with 1.5mm keystroke, 1 million key lifespan, and 300,000 lifting span. It comes equipped with zero delay and accidental touch prevention so it doesn’t get activated when you are not gaming. It has horizontal linear motors specially adjusted for games and can adjust for 150+ kinds of scenes offering vibration effect.
As for the optics, the duo sports a triple rear camera setup: a 64MP primary sensor with an f/1.8 aperture + a 13MP ultra-wide-angle lens with an f/1.25 aperture + a 5MP camera for portrait shots. On the front lies a 20MP selfie shooter.
The Black Shark 3 packs a 4720mAh battery. On the other hand, the Pro variant features a 5000mAh battery. Both the devices support 65W fast charging.